Products

EMC Filters - Manufactured by PRAX

DC Filters

 

  • Rated Current: 25 to 1.500 A
  • Max operating voltage: 1.200 Vac
  • Operating freq: DC
  • Single Stage
  •   
  • Reduction of contucted emissions towards solar panels
  • Prevention of pre-mature panel aging




 

DC Filters 1

Output Ferrites

  • Electromagnetic interference reduction from motor cable
  • Frequency range: 5-20 MHz
  • Max Current: 45 to 150 A

Output Ferrites 1

dV/dt Filters

 

  • Rated Current: 8 to 36 A
  • Max operating voltage:
  •    550 V ± 15
  • Operating freq: 50-60Hz
  •    
  • Output 3 phase filter for inverter, Minimizes dV/dt values
  • For long motor cables
  • Increases motor life while
  • reducing motor heating

 

dV/dt Filters 1

Three-Phase Filters with Neutral

 

  • Rated Current: 3 to 150 A
  • Max operating voltage: 520 Vac
  • Operating freq: dc to 60Hz
  • Single Stage
  •    
  • Rated Current: 8 to 200 A
  • Max operating voltage: 520/720 Vac
  • Operating freq: dc to 60Hz
  • Double Stage
  •    
  • Motor drives / Servo drives / Inverters / Converters / Automation / Elevators / Power supplies / UPS

 

Three-Phase Filters with Neutral 1

Three-Phase Filters

 

  • Rated Current: 7 to 180 A
  • Max operating voltage: 520 Vac
  • Operating freq: dc to 60Hz
  • Safety connector blocks
  •    
  • Rated Current: 10 to 1.000 A
  • Max operating voltage: 520 Vac
  • Operating freq: dc to 60Hz
  • Safety connector blocks
  •    
  • Rated Current: 6 to 660 A
  • Max operating voltage: 520 Vac
  • Operating freq: dc to 60Hz
  • Safety connector blocks
  •    
  • Rated Current: 7 to 250 A
  • Max operating voltage: 520/720 Vac
  • Operating freq: dc to 60Hz
  • Double Stage
  •    
  • Rated Current: 150 to 2.500 A
  • Max operating voltage: 720 Vac
  • Operating freq: dc to 60Hz
  • Three Stages
  •    

 Motor drives / Servo drives / Inverters / Converters / Automation / Elevators / Power supplies / UPS

Three-Phase Filters 1

Single-Phase Filters

 

  • General Purpose Filter
  • EMI suppression control line-to-line and line-to-ground
  • Compact Design
  • Single and Double Stage
  • 250 Fasten or screw terminals
  • Rated Voltage: 250 V
  • Rated Current: 
  •           1 to 10 A
  •           5 to 20 A
  •           5 to 30 A

 

 

Single-Phase Filters 1

Power Entry Modules

 

  • IEC Connector
  • Double Fuse holder, Switch
  • 250 Fasten Terminals
  • Rated Voltage: 250 V AC
  • Rated Current: 1 to 6 A

 

Power Entry Modules 1

IEC Inlet Filters

 

  • With or Without Fuse
  • 250 Fasten Terminals
  • Rated Voltage: 250V AC
  • Rated Current: 1 to 10 A

 

IEC 1

PCB Filters

  • Low cost type 
  • Compact PCB-mountable design
  • Rated Voltage: 250V AC
  • Rated Current: 1 to 10 A
PCB Filters